A full sublimation keycap set designed for the right side of a mechanical keyboard (Backspace, ⧵, Enter, Shift, Menu, Ctrl).
Your chosen image will be clearly printed in full color on the front, allowing for a fully personalized experience.
Design multiple keycaps as one continuous artwork, and complete the look with a coordinated tin case.
Note: LED backlighting will not shine through the keycaps.

• Total Size : 5.3 x 3.3 x 0.7 inch
• Material : PBT, Tin, High hardness sponge
• Country of Manufacture : Made in Korea

Notice

• Please check the production guide.
• The minimum printable line thickness is 0.2mm, and thinner designs may not be produced or may be omitted in part.
• Keycaps using OEM profiles.
• Available for cherry-like, SA profile keyboards, but interference with the substrate or other keys may occur.
• Due to the nature of printing, the design on the side is stretched and may come out lighter than the original color.
• The film may not fit up, down, left and right symmetries due to the stretch of film during printing, and there may be a difference of 1mm or less.
• Due to the nature of printing, please avoid designs with different background colors on the top and side as much as possible.
• Please note that some products may have fine scratches and spots due to the nature of the material, which is not a reason for defects.
• Due to the nature of printing, detailed expressions such as thin lines, small letters, gradations, and sophisticated 3D images are difficult to produce.
• Because the film stretches when printing, corners can be expressed finely brightly for dark background colors.
• Due to the printing nature of the tin case, the white image is not printed.
• Please be careful when using water, ethanol, acetone and hand sanitizer as long-term contact with the case, or excessive pressure with a wet tissue to wipe the case may smudge or peel off the printed area.

Pre-order Information

Keyboard Column Selection

• Prior to placing an order, kindly ensure to verify the column layout of your keyboard.
• Selecting an incorrect column layout could result in differences in height causing potential discomfort.

Compatibility of Keycaps

• The keycaps used are of the OEM profile.
• Before making a purchase, please check the coupling points on your keyboard. Keyboards without a cross-shaped (+) coupling might face usability challenges.